On weekdays from 9:00 to 17:00

Customer rating 10 (Kiyoh)

Easy self composition!

Own production locations

Fast delivery

Home Angled back

You have unsaved changes.

Are you sure you want to leave? Your unsaved changes may be lost.

Shape

Rectangular: most common shape. For seat cushions and back cushions (e.g., lounge sets, garden benches, and sunbeds).
Unequal sides:often used to create a corner. Commonly used for boat cushions.
Sloping back: for back cushions (lounge sofas and garden benches).
Trapezium: for chairs and corner sofas (when it is not at a 90-degree angle but slopes).
Pillow with side seam: for back cushions (e.g., garden benches, chairs, or lounge sets).
Pillow with center piece: for back cushions (e.g., garden benches, chairs, or lounge sets).
Round: for chair cushions or seat cushions.
Half round: for chair cushions or seat cushions.

Determining Size

For all cushions, except flock cushions

Measure your chair or sofa and enter these dimensions. You do not need to order extra centimeters. If your cushion is between elements, such as armrests, subtract 0.5 to 1 cm from the width.

For flock cushions

For flock cushions, specific points of attention apply to determine the sizes. Refer to the "Instructions and tips" below the 3D view of the cushion on this page for instructions on length, width, and thickness.

Color

Select the color(s) here. With 4 "Fabric," you will only see the fabrics available in your chosen color.

Inside and Outside

Each fabric in the configurator indicates in parentheses whether it is suitable for indoor or outdoor use.

Color Fastness

All fabrics have different colorfastness ratings. Some fabrics fade faster than others.

Each filling corresponds to specific preferences. View the 6 options below:

SG25: firm/sturdy, for back cushions and budget-friendly.
SG35 (medium): medium, water-permeable, quick-drying, mold-resistant, for outdoor use.
SG35 (hard): firm/sturdy, for seat cushions and budget-friendly.
HR30: soft/medium, resilient, quick-drying, and durable.
HR50: "lounge" filling, resilient, quick-drying, and durable.
Quick dry: firm, water-permeable, quick-drying, mold-resistant, for outdoor use.
Flock filling: fine pieces of polyether, standard for flock (back) cushions.

Zipper

We recommend placing the zipper on the longest side so that you can easily remove the cover from the filling.

Note: if the longest side is visible, it is better not to do this.

10%
discount

Overview

Shape:

Angled back

Size:

Color:

Anthracite 21

Fabric:

Cerdalon - Uni

Stuffing:

SG25

Finishing:

Tight Without border

Zipper:

Length

Enter the dimensions.

Add to basket

Instructions and tips

Special shape for L-shaped or U-shaped sofas

Note: If you use a slanted backrest pillow for an L-shaped or U-shaped sofa, you need a special shape for the corner, which is not standard on our site. Contact us by email for this.

Thickness at the top and bottom

The difference between the thickness at the bottom and the thickness at the top is half, with a maximum difference of 8 cm (assuming a height between 32 and 48 cm).

Maximum length/width

We can make almost any size. A pillow up to 200 to 220 cm looks the best. The larger the pillow, the greater the chance that the fabric will not look as nice around the pillow and may wrinkle.

Therefore, we recommend dividing larger pillows into parts that are a maximum of 200 to 220 cm long. For example, a 4-meter pillow consists of 2 parts of 200 cm each.

Special shape for L-shaped or U-shaped sofas

Note: If you use a slanted backrest pillow for an L-shaped or U-shaped sofa, you need a special shape for the corner, which is not standard on our site. Contact us by email for this.
Thickness at the top and bottom

The difference between the thickness at the bottom and the thickness at the top is half, with a maximum difference of 8 cm (assuming a height between 32 and 48 cm).
Maximum length/width

We can make almost any size. A pillow up to 200 to 220 cm looks the best. The larger the pillow, the greater the chance that the fabric will not look as nice around the pillow and may wrinkle.

Therefore, we recommend dividing larger pillows into parts that are a maximum of 200 to 220 cm long. For example, a 4-meter pillow consists of 2 parts of 200 cm each.

Customers about our Angled back cushion covers

Very satisfied

Garden set looks like new, with only new covers! Followed the description exactly and the covers fit exactly!

Ellen

16-6-2024

Very nice

Followed the instructions on the website and the cushion is absolutely perfect. Good quality. Very pleased.

Kelly

14-3-2024

Frequently asked questions about pillows with a slanted backrest

When should I use a slanted backrest?

A slanted backrest is a pillow that is often used as a backrest, with the sofa sloping slightly in the back. Think of lounge sofas and garden benches.

Four measurements apply to a pillow with a slanted backrest: length/width, height, thickness at the bottom, and thickness at the top. The difference between the thickness at the bottom and the thickness at the top is half, with a maximum difference of 8 cm (assuming a height between 32 and 48 cm).

Note that if you use a slanted backrest pillow on an L-shaped or U-shaped sofa, you need a special shape for the corner, which is not standard on our site (see image below). You can request this via
Should I use actual measurements?
Yes, you do not need to enter extra centimeters. There are a few exceptions:
- - If the cushion gets stuck somewhere, for example between two walls or armrests, we recommend taking off 0.5 to 1 cm in width per cushion for extra clearance. Otherwise, the fabric may start to fold.
- - If you use the cord finishing (which is outside the dimensions), you need to take an extra half centimeter off the length of the cushion.
Is there a maximum size for my cushion with slanted back?

In principle, there is no maximum size, but we do advise to stick to certain maximum sizes for the best result in terms of shape and shape retention. For a tight cushion, the maximum length is 200 cm to 220 cm.

If the cushion becomes longer, there is a chance that it will no longer look as tight. This is because the fabric has a little stretch, which can cause small folds at long lengths. However, you can easily smooth them out.
Can there be a deviation in the dimensions of the cushion?

The cushions are handmade, so there may always be a slight deviation. Of course, we do our best to make your cushions as precisely as possible. The margin within which the finishing should remain is 1 cm (- / +) per 100 cm cushion.

Do you have another question or need help? Please feel free to contact us via or send an email to , and we will assist you further.